| Product Line - GUIDED KEEPERS | STEP 1/3 |
SELECT SERIES - Guide Pin Style |
|
Guide Pin |
Connection |
|||||||
GK Series |
Diameter |
Lengths |
Guide Pin End |
Connection Machining |
Strength (Tensile FT/LBS) |
One Unit per Area |
||
 |
1.625"-8.25" |
Depends on Top Plate style selected
|
Drill / c'bore for cap screws and ream for dowel holes as needed |
13,900 |
100 sq in (10"x10"x1.00" Area) |
|||
|
1.625"-8.25" |
Depends on Top Plate style selected
|
Drill / c'bore for cap screws and ream for dowel holes as needed |
27,800 |
100 sq in (10"x10"x1.00" Area) |
|||
 |
2.125"-8.125" |
 |
 |
Drill, Ream, Tap (3/4-10 or M20-2.5) |
29,000 |
144 sq in (12"x12"x1.00" Area) |
||
 |
2.0"-9.875" |
 |
 |
Drill / c'bore for 3/8 or 10mm cap screws(2) and ream 5/16 or 8mm for dowels(2) |
27,800 |
196 sq in (14"x14"x1.25" Area) |
||
 |
1.75"-8.125" |
|
 |
Drill 1.5" diameter pocket - mill square locating hole |
38,400 |
225 sq in (15"x15"x1.25" Area) |
||
|
2.125"-9.125" |
|
|
Drill / c'bore for 1/2 or 12mm cap screws(2) and ream 3/8 or 10mm for dowels(2) |
48,700 |
324 sq in (18"x18"x1.25" Area) |
||
 |
1.75"-9.125" |
 |
 |
Drill / c'bore for 3/8 or 10mm cap screws(4) and ream .500 for center locating stud |
55,600 |
400 sq in (20"x20"x1.25" Area) |
||
 |
1.75"-10.125" |
 |
 |
Drill / c'bore for 3/8 or 10mm cap screws(6) and ream .625 for center locating stud |
83,400 |
625 sq in (25"x25"x1.25" Area) |
||
Click here to suggest improvements for our site.
Call us Toll-Free at 1-877-754-3837 (1-877-SLIFTER)
All products manufactured by Standard Lifters LLC are made in the USA. Patents #6848290 and #7024910 and other patents pending.
Copyright 2000 - 2012. No material or images from this site may be reproduced without written permission from Standard Lifters LLC.
If you are experiencing trouble with this site, contact the webmaster.