New Products

This base style was designed to offer a very economical solution to compare to the old guide pin, bushing, and spool method. The design of the base reduces manufacturing costs so Standard Lifters can offer the GK125 starting at $99 and the GK175 Series starting at $115 that is $25 less then the standard "A" style base price!
Clamps can be positioned to avoid adjacent blocks
Retaining ring prevents screw "fallout"
H Style Base
Cost Comparison
GK Features
GK Index
This series was designed with simplicity in mind. The connection to the pad uses 2 cap screws and 2 dowels providing common hardware. Two fasteners provide redundancy and anti-rotation of the Guide Pin and the connection to the pad is machines with common tooling in one setup. The GK120 series is also better designed for thinner or thicker pads.
GK120 Pad
Connection
Guide Pin Styles
Cost Comparison
GK120 Specs 1
GK120 Specs 2
This GK100 is the first series in a 1.00" diameter. It's innovative design provides a number of benefits from simple machining to easy assembly. The integrated locking method provides a way to ensure the assembly does not loosen during operation but still allows for the benefits of a center fastener design. The design even allows you to pick up the guide pin and thread it into the pad using only a ball end hex wrench!
GK100 Pad Connection
Guide Pin Styles
Cost Comparison
GK120 Specs 1
GK120 Specs 2
The "G" style bases are designed for lifter bar applications that require the base to be modular because space is limited or the length of the lifter bar is over 24". The design allows you to lace the base anywhere under the top plate and the spring pocket allows the use of a drop in gas spring or coil spring. See the cost savings example below to see how you can save over $100 per lifter assembly.
Available in GK100, 120, and 125 Series
Cost Comparison
GK Base Styles
GK Index
GK120G Base Specs
The SM12DR costs 15% less. It features a one piece base construction with a drop in gas spring for easy replacement. Comes complete with maintenance free bushings and a thicker top plate for more rigidity. Guide Pins use standard socket head cap screws and feature o-rings what prevent the Guide Pins from falling through the base during disassembly.

O-ring prevents the Guide Pin from falling through the base during disassembly.

Patent #7,024,910
Lifter Index 1
SM12DR Specs
SM12DR Ordering
Die Design Aids

Click here to suggest improvements for our site.

Call us Toll-Free at 1-877-754-3837 (1-877-SLIFTER)

All products manufactured by Standard Lifters LLC are made in the USA. Patents #6848290 and #7024910 and other patents pending.

Copyright 2000 - 2012. No material or images from this site may be reproduced without written permission from Standard Lifters LLC.

If you are experiencing trouble with this site, contact the webmaster.